This Section of the DFU provides Pump Module (Model
and Syringe Module (Model
It is used in conjunction with:
®
•
Alaris
product administration set instructions
•
Drug product labeling
•
PC Unit Section of this
Pump Module Set Compatibility Card
•
•
Pump Module Technical Service Manual
•
Syringe Module Set Compatibility Card
•
Syringe Module Technical Service Manual
•
System Maintenance software (and its instructions) for Alaris
System check-in, maintenance, and wireless configuration
The Pump and Syringe Modules are intended for facilities that
utilize infusion and/or syringe pumps for the delivery of fluids,
medications, blood, and blood products using continuous or
intermittent delivery through clinically acceptable routes of
administration; such as, intravenous (
subcutaneous, epidural, enteral, or irrigation of fluid spaces.
The Pump and Syringe Modules are indicated for use on
adults, pediatrics, and neonates. Up to four (4) Pump and/or
Syringe Modules can be connected to the Alaris
If a procedure/information applies to a specific module, the
following identifiers indicate the applicable module.
FU
RATE (mL/h)
Pump Module :
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
RATE (mL/h)
Syringe Module:
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Administration Sets / Syringes: See "General Information"
for specific "Administration Set / Syringe Information".
Alarms, Errors, Messages: See "Troubleshooting and
Maintenance" for module-specific alarms, errors and
messages.
®
Alaris
System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
Introduction
) instructions and information.
8110
DFU
), intra-arterial (
IV
)
8100
WARNING
Read all instructions, for both
the infusion modules and PC Unit,
before using the Alaris
CAUTION
®
),
IA
®
System.
Getting Started
®
System.
O
nly
Getting Started
2-1