Cardinal Health Alaris Directions For Use Manual page 98

Primary Infusion
Bolus Dose (Continued)
Stopping Bolus Dose (Continued)
4. To stop continuous infusion, press and hold
key until a beep is heard (approximately
Restoring Bolus Dose
A bolus dose can be restored after it has completed, either
prior to or after the module has been turned off, as indicated in
the following procedures.
The display examples in this procedure represent restoring a
bolus dose which was programmed using the Drug Library.
Even where the displays are different when restoring a bolus
dose which was programmed using a non-library drug, the
procedure is the same.
1. Bolus dose completed - module not turned off:
CHANNEL SELECT
a. Press
b. Verify infusion parameters and press
RESTORE
c. Press
d. Verify dosing parameters and press
2. Bolus dose completed - module turned off:
CHANNEL SELECT
a. Press
RESTORE
b. Press
c. Verify parameters and press
d. Verify infusion parameters and press
2-34
Programming
- With Guardrails Suite MX Protection (Continued)
®
1.5
key.
BOLUS
soft key.
START
key.
soft key.
NEXT
soft key.
BOLUS
CHANNEL OFF
seconds).
soft key.
soft key.
soft key.
Alaris
Pump and Syringe Modules Section
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
®
System (with v9 Model 8000) DFU