Preparing Syringe and Administration Set (
Priming - Manual (Continued)
Eliminate Mechanical Slack (Continued)
3.
Open administration set clamp.
4.
Prime, as follows, using Priming option (see "Priming -
Using Options Menu"):
a.
Follow applicable procedure (based on whether or
not pressure sensing disc is installed) through step to
press and hold PRIME soft key.
b.
Prime until fluid drips from end of tubing.
c.
Complete procedure (installing pressure sensing disc,
if applicable, and exiting options menu).
®
Alaris
System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
)
Syringe Module
(Continued)
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
2-19
Getting Started