Displays; Configurable Settings - Cardinal Health Alaris Directions For Use Manual

The displays illustrated throughout this document are for
illustration purposes only. The display content varies,
depending on configuration settings, type of disposable in
use, hospital-defined Data Set uploaded using the Guardrails
Suite , programmed parameters, and many other variables.
MX
Main Display
See the PC Unit Section of this DFU.
See the PC Unit Section of this DFU for system configurable
settings.
If the configuration settings need to be changed from the
Factory default settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-
practice Data Set must be uploaded to enable the Profiles
feature. Date and Time is a system setting and is the same in
all profiles.
Feature
t Alarm Limit, High
E CO
2
t Alarm Limit, Low
E CO
2
i Alarm Limit, High
F CO
2
Limit Mode
No Breath Alarm
Respiratory Rate Alarm Limit, High
Respiratory Rate Alarm Limit, Low
®
Alaris System (with v9 Model 8000) DFU
EtCO Module Section
2
Features and Displays (Continued)

Displays

Configurable Settings

Default Setting
Adult:
Neonatal:
Adult:
Neonatal:
Neonatal:
Adult:
Neonatal:
Adult Mode:
Neonatal Mode:
Adult Mode:
Neonatal Mode:
®
mmHg
60
mmHg
60
mmHg
10
mmHg
10
Adult: mmHg
8
mmHg
8
Adult
seconds
30
seconds
20
bpm
35
bpm
150
bpm
6
bpm
12
Options
- mmHg
5 99
- mmHg
0 98
- mmHg
2 99
Adult or Neonatal
- seconds
10 60
- bpm
1 150
- bpm
0 149
General Information
5-19