Stopping Secondary And Returning To Primary - Cardinal Health Alaris Directions For Use Manual

Secondary Infusion - NO
To program a primary infusion, see "Primary Infusion - With
Guardrails ® Suite MX Protection", "IV Fluid Infusion" procedure.
To program a basic infusion, see "Infusion -
Suite MX Protection".
SECONDARY
1. Press
Continue with next step.
2. Enter secondary infusion rate or duration, as follows:
• To enter secondary infusion rate, press
and use numeric data entry keys.
• To enter duration, press
numeric data entry keys.
3. To enter secondary volume to be infused, press
key and use numeric data entry keys.
4. Open clamp on secondary administration set.
5. Verify correct infusion parameters and press
key.
Changing Primary Infusion Parameter
CHANNEL SELECT
1. Press
PRIMARY
2. Press
3. To change primary infusion parameter, press applicable
RATE
soft key ( or
4. Verify correct primary infusion parameters and press
SECONDARY
soft key.
• Secondary setup screen displays.
5. To resume secondary infusion, press

Stopping Secondary and Returning to Primary

See "Secondary Infusion - With Guardrails
Protection".
2-56
Programming
(
Pump Module
Infusion (Continued)
soft key and then
DURATION
key.
soft key.
VTBI
), and use numeric data entry keys.
Guardrails Suite MX Protection
®
) (Continued)
®
Guardrails
NO
BASIC SEC
soft key.
RATE
soft key
soft key and use
VTBI
soft
START
soft
START
soft key.
®
Suite MX
®
Alaris System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART