Pausing, Changing, Restarting Infusion
Pausing and Restarting Infusion
PAUSE
1.
Press
key.
PAUSE
•
scrolls in Message Display.
PAUSED
•
appears on Main Display.
•
Yellow Standby Status Indicator illuminates.
•
After
minutes,
2
and audio prompts begin, and yellow Standby Status
Indicator flashes.
2.
To reinitiate infusion:
RESTART
•
Press
OR
CHANNEL SELECT
•
Press
soft key.
NOTES:
To stop a Bolus Dose, see the "Bolus Dose" procedure.
The Pump Module keypad is used in the illustrations but the
keys are the same for the Syringe Module.
Changing Rate or VTBI During Infusion
CHANNEL SELECT
1.
Press
RATE
2.
Press either
3.
To enter desired parameter, use up/down arrows for rate
titration, or numeric data entry keys.
4.
Verify correct infusion parameter entry and press
soft key.
®
Alaris
System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
PAUSE-RESTART CHANNEL
key.
key and then press
key.
VTBI
or
soft key.
visual
START
OR
START
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
2-57
Programming