Mounting In A 19-Inch Rack Using A Pre-Installed Rack Shelf; Mounting In A 19-Inch Rack Using Front And Rear Brackets - AudioCodes Mediant 4000 SBC Hardware Installation Manual

4.2.1

Mounting in a 19-inch Rack using a Pre-Installed Rack Shelf

The device can be placed on a pre-installed shelf in a 19-inch rack, as described below. This
is the recommended method for mounting the device.

To mount the device on a pre-installed shelf in a 19-inch rack:
1. Make sure that your rack shelf is secured to the rack posts and in a horizontal level
position in the rack.
2. Place the device on the pre-installed shelf in the rack.
3. Position the chassis so that the pre-attached, front-mounting brackets are flush against
the front rack posts and that the holes of the brackets align with the holes on the posts.
4. Secure the front-mounting brackets to the rack posts using standard 19-inch rack bolts
(not supplied). This step is crucial in that it prevents the chassis from accidently sliding
off the shelf.
4.2.2

Mounting in a 19-inch Rack using Front and Rear Brackets

The device can be mounted in a 19-inch rack by attaching the chassis directly to the rack
frame, using both front- and rear-mounting brackets.
Warnings:

At least two people are required to mount the device in the 19-inch rack.

When attaching the chassis to the rack, it is mandatory to connect it using both
the front-mounting brackets and the rear-mounting brackets (supplied).
Avertissements:

Au moins deux personnes sont nécessaires pour monter l'appareil dans le bâti 19
pouces.

En fixant le châssis au bâti, il est impératif de le connecter à l'aide de supports de
montage avant et de supports de montage arrière.réglables (fournis).
Depending on the depth of the rack in which you are installing the device, you can order one
of the following rear-mounting brackets, which differ in length, from AudioCodes as a Rear-
Rack Mounting Bracket Kit accessory item (separate orderable item):

Adjustable rear-mounting bracket from 59.3 to 62.7 cm (23.3 to 25 in.). The length of
the rear-mounting brackets can be adjusted from 59.3 to 62.7 mm, to suit the distance
between the chassis and the rear post. The customer part number (CPN) of this kit is
FRU/M4K83/REARRMK60
Rear-Mounting Bracket x 2

Rear-mounting bracket of length 80 cm (31.5 in.) The CPN of this kit is
FRU/M4K85/REARRMK80.
Hardware Installation Manual
Rear-Mounting Flange x 2
x 2
22
Mediant 4000 SBC
x 6
Document #: LTRT-41511