1F2-84 M161 ENGINE CONTROLS
Failure
Description
Code
Communication with
transponder missing
25
Unprogramed ECM with
immobilizer
141
Circuit Description
Immobilizer is a device disabling vehicle ignition unless a specific key is used and designed to help prevent
vehicle theft.
Immobilizer is comprised of two devices, a key with encoded transponder and ECM with the same encoding of
the transponder. When a key is inserted into the hole to start vehicle and turned to ON, the ECM reads and
decodes the transponder code and, if the same, starts the engine, it is called immobilizer. It means immobilizer
system disables starting by stopping fuel supply if the code in the transponder does not match the code stored
in ECM each other.
IMMOBILIZER
Trouble Area
When missing the transpon-
der signal
When malfunction of
immobilizer
Required immobilizer
encoding, no paired
condition of immobilizer even
through start trial
Maintenance Hint
•
Inspection the Engine Control Module
(ECM) pin 13, 14 about short circuit or
open with bad contact
•
Inspection the power source or ground
short circuit or open of immobilizer unit
•
Inspection the transponder condition
(broken etc.)
•
Inspection the ECM
•
Fulfill the immobilizer pairing
YAD1F630
SSANGYONG Y200