1F3-42 DIESEL ENGINE CONTROLS
Removal & Installation Procedure
1. Remove the vacuum line.
YAD1FBY0
2. Remove the bolts (1) evenly.
Notice: If necessary, rotate the engine until the
pressure on the tappet of the vacuum pump is
released.
YAD1FBZ0
3. Remove the vacuum pump (2).
4. Install the vacuum pump (2).
Installation Notice
Tightening Torque
Clean the gasket residues of sealing surface of
vacuum pump and replace the gasket (5).
5. Connect the vacuum line.
YAD1FC00
10 N•m (89 lb-in)
SSANGYONG Y200