Volkswagen Passat 1995 Official Factory Repair Manual page 3773

Central locking, repairing (Sedan)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.57.2
- Install inside door handle and pull rod.
- Activator and door lock must be in locked
position (down) to install connector rod.
Note:
For the driver's door, the door lock latch must be
in the closed position (second or main lock
position).
- Lock washer -3- must be locked into position -
arrows-.
- Press in connector rod -1- without tension and
close hinge -2-.
CAUTION!
Do not pull connector rod downward when
pressing in.
- When locking, hinge -2- must turn lock washer -1-
and disengage.
- Perform function check.
- Install trim panel.
Page 9 of 14
57-39
12/7/2004