Volkswagen Passat 1995 Official Factory Repair Manual page 3743

Front door assembly
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.57.1
Door, removing and installing
For doors with central locking system and /or
power windows:
- Disconnect multi-pin connector -1- at A-pillar.
- Remove nut -2- and remove pin.
- Remove grub screw -arrow- from upper and lower
hinges.
- Lift door up and out of hinge brackets.
Notes:
Clean screw with wire brush and nut thread with
thread tap. Coat screw with locking fluid D 185
400 A 2.
Tighten nut -2- to 6.5 Nm (57 in. lb).
Page 9 of 30
57-9
12/7/2004