Volkswagen Passat 1995 Official Factory Repair Manual page 3764

Front door assembly
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.57.1
Installing
- Loosen nut -3- with 5.5 mm wrench. Release lever
releases tension.
1 - Assembly position
- Install door lock. Free-play adjustment is
accomplished between release lever and relay
lever.
2 - Installation position
- Tighten nut -3- , 2.4 Nm (left side: right-hand
thread, right hand side: left-hand thread).
- Make adjustment every time door handle or door
lock is installed. Check for proper functioning after
installation.
- Install cover.
Page 30 of 30
57-30
12/7/2004