Volkswagen Passat 1995 Official Factory Repair Manual page 3774

Central locking, repairing (Sedan)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.57.2
Rear door activator, removing and
installing
Removing
Remove door trim, partially remove moisture
barrier Page 70-26
- Disconnect hoses from clips -5-.
- Disconnect connector rod -6-.
- Remove screws -3- and remove activator
downward and out.
- Disconnect pressure hose -4- and multi-pin
connector -7-.
Installing
- Connect pressure hose and multi-pin connector.
Connector must engage in clip.
- Insert activator with pre-installed screws and
tighten screws.
Note:
Activator and door lock must be in locked position to
install connector rod.
Page 10 of 14
.
57-40
12/7/2004