Volkswagen Passat 1995 Official Factory Repair Manual page 3770

Central locking, repairing (Sedan)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.57.2
Bi-pressure pump, installing (Sedan)
- Install pressure line.
- Connect multi-pin connector to bi-pressure pump.
Check for proper seating.
- When inserting bi-pressure pump, connector -1-
(4-pin) must engage in clips.
- When instaling bi-pressure pump be sure that
water drain hose -2- for power roof is not pinched
and is not pulled from grommet. After completed
installation check routing of hose once more.
Page 6 of 14
57-36
12/7/2004