Avaya Definity SI Maintenance Manual page 197

ATM Tips
Screen 5-32
display errors
Port Mtce
Name
AT01A ATM-NTWK
AT01A ATM-NTWK
AT02A ATM-NTWK
AT02A ATM-NTWK
AT01B ATM-NTWK
AT01A ATM-NTWK
Screen 5-32. Screen output for display errors command
In this example the errors that have ATM-NTWK for Name and 1 for Data
indicate an error returned to the TN230X from the ATM network. In this
case, Type indicates the Cause Code returned by the ATM network (see
Table 5-10
reported from the ATM network. For more information about these Cause
Codes and repair information see
Table 5-10. Observed Cause Codes
Cause
Code Definition
3 No route to destination
31 Normal, unspecified
41 Temporary failure
47 Resources unavailable,
unspecified
63 Service or option
unavailable, unspecified
555-233-123
shows the screen output for display errors.
HARDWARE ERROR REPORT
Alt Err Aux
Name Type Data
41 1
31 0
0 0
31 0
31 0
3 1
below). In the example above, two Cause Codes (41 and 3) are
Observed Cause
The ATM addresses administered in the ATM switch (show
signaling routes or show signaling esi) or in DEFINITY
(display atm pnc) are incorrect.
This is a normal return.
This "try again later" Cause Code has been observed when
the source of the problem is on another port (for example, a
routing problem on another port that displays Cause Code 3).
DEFINITY call volume is too high for the available resources
in the ATM network.
DEFINITY call volume is too high for the available resources
in the ATM network.
First Last
Occur Occur
11/12/16:59 12/09/15:10 14 0
11/13/18:27 11/20/20:02 5
11/13/18:45 11/13/18:45 1
11/15/14:40 11/15/14:41 2
11/16/17:39 11/16/17:39 1
11/16/18:19 11/26/13:13 12 0
''ATM-SGRP (ATM Signaling
Issue 4 May 2002
Page 9 SPE A
Err Err Rt/ Al Ac
Cnt Rt Hr St
0 n n
0 0 n n
0 0 n n
120 0 n n
0 0 n n
0 n n
Group)''.
5-93