2-512
Lubricating System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
4.
Install and tighten the oil pump retaining bolts.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
5.
Install the timing chain.
6.
Install the timing chain cover.
7.
Connect the battery negative cable.
FE02-0366b
2.9.8.2 Oil Pump Cleaning and Inspection
Cleaning Procedures:
1.
Oil Pump Valve Inspection:
a. Remove the valve safety bolts, remove the springs
and the slide valve.
b. Check whether the surface of slide valve is worn.
whether the hole wall is worn. Whether the slide valve
and the inner hole clearance is normal.
c. Apply oil on the slide valve, install slide valves and
springs, tighten valve bolts.
2.
Remove oil pump rear cover bolts.
FE02-0368b
Engine