Geely EC718 2009 Workshop Manual page 969

Transmission / Drive Axle
3.2.6 Removal and Installation
3.2.6.1 Clutch Pedal Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove
12.8.3.1 Instrument Panel
Note
Please use trim repair tools, otherwise interior trims
will easily be scratched.
3. Disconnect brake switch wiring harness connector.
4. Separate the clutch master cylinder piston rod U-shaped
clip and the clutch pedal.
FE03-0201b
5. Separate the vacuum brake booster rod U-shaped clip
and brake pedal.
6. Remove the clutch pedal assembly upper retaining bolts.
FE03-0225b
Clutch System
Disconnection.
the instrument
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
3-15
panel. Refer to