Geely EC718 2009 Workshop Manual page 972

3-18 Clutch System
1
3
2
EC718/EC718RV EC715/EC715RV 10/2009
2
FE03-0206b
3
1
FE03-0207b
FE03-0208b
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Disconnection.
2. Remove Instrument panel lower left panel. Refer to
12.8.3.1 Instrument Panel
Note
Before disconnecting the cylinder, release the
clutch / brake fluid.
3. Loose thread on the master cylinder drive dual wire hoop,
Remove tank to the master cylinder oil inlet hose (1).
4. Disconnect clutch master cylinder metal connector (2).
5. Remove pin (1) from the clutch pedal and the piston rod
U-shaped clip, and pull out connecting pin (1).
6. Release the clutch master cylinder piston rod and the
piston rod between the U-shaped clip locking nut, piston
rod U-shaped clip from the clutch master cylinder piston
rod on the screw of 2.
7. Remove the clutch master cylinder retaining nuts (3).
8. Pull out of master cylinder along the direction of the engine
compartment.
Transmission / Drive Axle
Replacement.