Starter Replacement - Geely EC718 2009 Workshop Manual

Engine Starting / Charging System JL4G18-D
3. Install the drive belt.
4. Install the generator charging wiring harness and tighten
the harness retaining nut.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
FE02-0425b
5. Connect the generator harness connector.
6. Connect the battery negative cable.
FE02-0426b

2.11.8.4 Starter Replacement

Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices"
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Disconnect starter control wiring harness connector.
FE02-0427b
Disconnection.
EC718/EC718RV EC715/EC715RV 10/2009
2-581