Geely EC718 2009 Workshop Manual page 298

2-216 Control System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
4. Clean the filter and make sure the solenoid valve is not
damaged or deformed, otherwise it must be replaced.
5. Install the VVT solenoid valve filter.
FE02-0047b
6. Install the solenoid valve filter and tighten the bolts.
Torque: 16.5 Nm (Metric) 12.2 lb-ft (US English)
7. Install the generator.
8. Connect the battery negative cable.
FE02-0048b
2.2.8.5 VVT Solenoid Valve Cleaning
Note
A. Inoperative near at high temperatures or near a fire
to avoid cleaning agents being ignited or exploded.
B. The length of wire should be more than 3m. It is
recommended to install the wire relay.
C. During the cleaning process, do not scratch the O-
ring, scratch or knock the surface of the valve or drop
the valve..
D. After repair, reinstall the valve VVT and tightening the
bolt to 10 Nm.
E. Replace repeatedly cleaned VVT valve.
Engine