Engine
No
Check whether the water pump seal is leaking.
Step 4
No
Check whether the cylinder head cover torque is appropriate.
Step 5
No
Check for leaking at the follows locations:
Step 6
No
Confirm that the fault has been fixed.
Step 7
Cooling System JL4G18-D
Replace the Pump Seal.
Yes
Tighten the cylinder head gasket bolts to the
Yes
specified torque. If necessary, replace the
cylinder head gasket
(a)
Intake Manifold
(b)
Cylinder Head Gasket
(c)
Cylinder Block Bolt
(d)
Heater Core
(e)
Radiator Discharge Plug
When necessary, repair or replace parts to
Yes
eliminate leakage faults.
EC718/EC718RV EC715/EC715RV 10/2009
2-481