Geely EC718 2009 Workshop Manual page 970

3-16 Clutch System
EC718/EC718RV EC715/EC715RV 10/2009
7. Remove clutch / brake pedal assembly bolt and nuts.
FE03-0202b
8. Remove the clutch / brake pedal assembly, remove
screws and pull retaining nuts out of the pedal.
9. Remove the return spring and clutch pedal.
FE03-0203b
Installation Procedure:
1. Install the return spring and clutch pedal.
2. Install the pedal screws and nuts.
Torque: 35 Nm (Metric) 25.9 lb-ft (US English)
Note
Apply grease on the pedal axle and the return
spring.
FE03-0204b
Transmission / Drive Axle