Engine
3.
Connect the idle speed control valve wiring harness
connector.
4.
Connect the battery negative cable.
2.2.8.2 Fuel Injector Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in the
"Warnings and Notices".
1.
Release fuel system pressure. Refer to
Pressure Release
2.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
3.
Remove the hood. Refer to
Replacement.
4.
Disconnect the crankcase ventilation tube.
FE02-0023b
5.
Disconnect the fuel injector wiring harness connector.
Note
Pull up the connector gray part of the self-locking
device, and then press down to Disconnect the
connector.
FE02-0024b
Control System JL4G18-D
Procedure.
Disconnection.
2.6.8.1 Plastic Engine Shield
EC718/EC718RV EC715/EC715RV 10/2009
2-207
2.3.8.1 Fuel