2-204
Control System JL4G18-D
–
Engine control module is disconnected or replaced.
–
The fuse between the ignition voltage IGN1 or battery positive voltage and the engine control module is removed.
–
The idle air control valve has been removed or replaced.
–
idle air control system malfunction.
Read in procedure:
Run the engine until the engine coolant temperature exceeds 90°C(194 ºF).
Step 1
Next
Step 2
Run the engine at idle speed for 5min.
Next
Step 3
Turn off the ignition switch.
Next
Step 4
Read in procedure completed. Restart the engine and confirm that the engine idle speed is normal.
EC718/EC718RV EC715/EC715RV 10/2009
Engine