Geely EC718 2009 Workshop Manual page 986

3-32 Manual Transmission
1st Gear Working Status:
The shift control makes the 1st/2nd shift shaft and fork move
to the front end of the transmission. The 1st/2nd gear
synchronizer and 1st gear are meshing. Main shaft receives
the input torque from the 1st gear and outputs torque and
speed opposite to the input shaft.
EC718/EC718RV EC715/EC715RV 10/2009
2nd Gear Working Status:
FE03-2004b
The shift control makes the 1st/2nd shift shaft and fork move
to the rear end of the transmission. The 1st/2nd gear
synchronizer and 2nd gear are meshing. Main shaft receives
the input torque from the 2nd gear and outputs torque and
speed opposite to the input shaft.
Transmission / Drive Axle
FE03-2005b