Engine
Engine Mechanical System JL4G18-D
4.
Tighten the cylinder head cover bolts.
Note
When tightening, tighten a single bolt several times,
in accordance with the specified torque.
Short Bolts:
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
Long Bolts, Nuts, Special Bolts:
Torque: 11 Nm (Metric) 8.2 lb-ft (US English)
5.
Install the crankcase ventilation vacuum tube.
FE02-0017b
6.
Install the crankcase ventilation tube.
7.
Install ignition coil and ignition wire.
8.
Install the engine plastic shield.
9.
Connect the battery negative cable.
2.6.8.3 Drive Belt Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
EC718/EC718RV EC715/EC715RV 10/2009
2-333