Geely EC718 2009 Workshop Manual page 449

Engine Engine Mechanical System JL4G18-D
2.6.8.12 Camshaft Replacement
Removal Procedure:
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the engine plastic shield. Refer to
Engine Shield
3. Remove the cylinder head cover. Refer to
Head Cover
4. Remove the drive belt. Refer to
Replacement.
5. Remove the timing chain cover. Refer to
Chain Cover
FE02-0177b
6. Remove the timing chain. Refer to
Replacement.
7. Remove the intake camshaft VVT actuator.
Note
Remove the camshaft VVT actuator tightening bolt
with a wrench holding the camshaft.
8. Remove the exhaust camshaft sprocket.
Note
Remove the camshaft sprocket tightening bolts with
a wrench holding the camshaft.
FE02-0178b
Disconnection.
Replacement.
Replacement.
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
2-367
2.6.8.1 Plastic
2.6.8.2 Cylinder
2.6.8.3 Drive Belt
2.6.8.9 Timing
2.6.8.10 Timing Chain