3-20
Clutch System
EC718/EC718RV EC715/EC715RV 10/2009
1.
During the hydraulic system bleeding, make sure the
clutch / brake fluid level is between reservoir minimum
(MIN) and maximum (MAX) marker.
FE03-0211b
2.
Connect one end of the vinyl plastic hose to the bleeder
nipple, the other end to a half full brake fluid container.
3.
Slowly press the clutch pedal several times.
4.
Release the bleeder nipple screws, until the fluid begins
to flow, and then tighten the bleeder nipple screws.
5.
Repeat step 3 until bubbles no longer appear in brake
fluid.
6.
Fill brake fluid to the maximum (MAX) marker level.
FE03-0212b
Transmission / Drive Axle