Transmission / Drive Axle
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Disconnection
2.
Lift the vehicle.
3.
Remove the engine bottom shield. Refer to
and Right Engine Bottom Shield
4.
Remove
3.3.8.3 Transmission Assembly
5.
Remove the pilot bearing from the transmission input
shaft.
FE13-0217b
6.
Separate and remove the fork.
Installation Procedure:
1.
Install the fork to the dust cover.
Clutch System
the
transmission
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
3-23
12.10.1.7 Left
Replacement.
assembly.
Refer
to