Geely EC718 2009 Workshop Manual page 473

Engine Engine Mechanical System JL4G18-D
10. Install the VVT solenoid valve.
11. Install the camshaft position sensor.
12. Install the coolant temperature sensor wiring harness
connector.
13. Install the fuel rail assembly.
14. Install the timing chain.
15. Install the timing chain cover.
16. Install the engine mounting.
17. Install the drive belt.
FE01-0203b
18. Install the cylinder head cover.
19. Install the ignition coil and ignition wire.
20. Install the exhaust manifold.
21. Install the intake manifold assembly.
22. Install the throttle body.
23. Fill the engine coolant.
24. Install the engine plastic shield.
25. Connect the battery negative cable.
2.6.8.15 Cylinder Head Assembly Removal
and Installation
Removal Procedure:
1. Remove
2.6.8.14 Cylinder Head Assembly
2. Remove the valve Lifter.
FE02-0204b
the cylinder head
EC718/EC718RV EC715/EC715RV 10/2009
2-391
assembly. Refer to
Replacement.