Geely EC718 2009 Workshop Manual page 367

Engine
Next
Enter the security code.
Step 4
Next
Erase the key: select the recorded key location and erase. If you select all, all the keys will be removed.
Step 5
Next
Step 6 Place the ignition switch at "OFF" position and wait about 5min or so.
Next
Step 7 Key erase successful .
2.5.7.9 Replaced Security Module Programming
Insert a new key.
Step 1
Next
Turn the ignition switch to "ON" position.
Step 2
Next
Enter into the anti-theft system.
Step 3
Next
Step 4 Set security code.
Next
Step 5 Enter the security code (preset the four-digit security code).
Engine Anti-theft System JL4G18-D
FE02-7002b
EC718/EC718RV EC715/EC715RV 10/2009
2-285