Engine
Auxiliary Emission Control JL4G18-D
Installation Procedure:
1.
Install the heated pre-catalytic oxygen sensor.
FE02-0438b
2.
Tighten the heated pre-catalytic oxygen sensor.
3.
Install the three-way catalytic converter.
4.
Connect the battery negative cable.
FE02-0437b
2.4.7.3 Canister Solenoid Valve Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
EC718/EC718RV EC715/EC715RV 10/2009
2-271