Geely EC718 2009 Workshop Manual page 523

Engine
2.7.6 Removal and Installation
2.7.6.1 Exhaust Manifold Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
Note
Removing the bolt when it is hot is likely to damage the
bolt or flange nuts weld on the exhaust manifold.
Remove the bolt when the engine is cooled down.
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the three-way catalytic converter left connecting
bolt.
FE02-0290b
3. Remove
connecting bolt.
FE02-0291b
Exhaust System JL4G18-D
Disconnection.
the three-way catalytic
EC718/EC718RV EC715/EC715RV 10/2009
2-441
converter right