Geely EC718 2009 Workshop Manual page 814

2-732 Control System JL4G15-D
ECM detects the engine running
P0340 but does not receive the camshaft
position sensor signal
ECM detects the engine running,
but receives a camshaft position
P0341
sensor signal and that does not
match calibration.
3. Schematic:
Crankshaft Position Sensor
Camshaft Position Sensor
4. Diagnostic Steps:
Note
Before carrying out this diagnosis step, observe the data list on scan tool and analyze the accuracy of the data, as
these will help with quick diagnosis.
EC718/EC718RV EC715/EC715RV 10/2009
1. ECM detects the engine running.
2. ECM detects the crankshaft
position sensor signal.
3. Camshaft position sensor signal is
lost.
1. ECM detects the engine running.
2. ECM detects the crankshaft
position sensor signal.
3. ECM detected camshaft position
sensor signal does not match the
reference crankshaft position
sensor signal.
A
B
B
A
C
Engine
1. Sensor Circuit
2. Sensor
3. Camshaft Signal Wheel
4. ECM
Engine
Control
Module
FE02-5219b