Geely EC718 2009 Workshop Manual page 467

Engine Engine Mechanical System JL4G18-D
2.6.8.14
Replacement
Removal Procedure:
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the engine plastic shield. Refer to
Engine Shield
3. Discharge the engine coolant. Refer to
Coolant Discharge and
4. Remove the throttle body. Refer to
Assembly
5. Remove the intake manifold assembly. Refer to
2.6.8.6 Intake Manifold Assembly
FE02-0187b
6. Remove the exhaust manifold. Refer to
Manifold
7. Remove the ignition coil and ignition wire. Refer to
2.10.8.3 Ignition Coil
8. Remove the cylinder head cover. Refer to
Head Cover
9. Remove the drive belt. Refer to
Replacement.
10. Remove the engine mounting. Refer to
Mount
11. Remove the timing chain cover. Refer to
Chain Cover
12. Remove the timing chain. Refer to
Replacement.
13. Remove the fuel rail. Refer to
Replacement.
14. Disconnect the coolant temperature sensor wiring
harness connector. Refer to
Temperature Sensor
15. Remove the camshaft position sensor. Refer to
2.10.8.1 Camshaft Position Sensor
16. Remove the VVT solenoid valve. Refer to
Solenoid Valve Replacement and Filter
17. Remove the camshaft. Refer to
Replacement.
Cylinder Head
Disconnection.
Replacement.
Filling.
Replacement.
Replacement.
Replacement.
Replacement.
Replacement.
Replacement.
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
2-385
Assembly
2.6.8.1 Plastic
2.8.8.1 Engine
2.6.8.5 Throttle Body
Replacement.
2.7.6.1 Exhaust
2.6.8.2 Cylinder
2.6.8.3 Drive Belt
2.6.8.7 Engine
2.6.8.9 Timing
2.6.8.10 Timing Chain
2.2.8.2 Fuel Injector
2.2.8.6 Engine Coolant
Replacement.
2.2.8.4 VVT
Cleaning.
2.6.8.12 Camshaft