Geely EC718 2009 Workshop Manual page 460

2-378 Engine Mechanical System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
33. Slowly lift the vehicle to separate the powertrain from the
vehicle body.
Note
In the lifting process, avoid the powertrain assembly
tilt on the working table. Pay attention to the
powertrain and vehicle body interference.
34. Use an engine lifting device to support the engine and
then separate the engine and the gearbox. Refer to
3.3.8.3 Transmission Assembly
Installation Procedure:
1. Use the engine lifting device to support the engine and
then assemble the engine and the gearbox assembly.
2. Place the powertrain assembly on the mobile working
table, lift the vehicle and move the working table so the
powertrain assembly moves back into the vehicle body
frame.
3. Slowly lower the vehicle. Pay attention in the lowering
process, do not interfere with the vehicle body frame.
Note
Make sure solid contact between the working table
and the powertrain, otherwise it will result in bodily
FE02-0479b
injury.
4. Install the right engine mount assembly.
5. Install the left gearbox mount assembly.
FE02-0480b
Engine
Replacement.