Geely EC718 2009 Workshop Manual page 450

2-368 Engine Mechanical System JL4G18-D
9
1
5
3
7
EC718/EC718RV EC715/EC715RV 10/2009
11 6 4
10 8 2
FE02-0179b
9. As shown in the graphic, gradually release the camshaft
bearing cap bolts, rotate half a circle to a whole circle each
time.
Note
Be careful when remove the camshaft. Avoid
abrasions, scratches or damage to the camshaft
surface or bearing surface.
10. Remove the camshaft.
Note
Camshaft must be withdraw from the bearing in
order to avoid abrasions, scratches or damage to
the camshaft surface or bearing surface.
11. Inspect for the camshaft and bearing wear. If necessary,
replace.
Installation Procedure:
Note
Be careful when install the camshaft. Avoid abrasions,
scratches or damage to the camshaft surface or bearing
surface.
Note
Before installation apply engine oil to the camshaft and
the seal contacting surface.
Engine