Transmission / Drive Axle
3.
Install clutch / brake pedal assembly bolt and nuts.
Torque: 23 Nm (Metric) 17.0 lb-ft (US English)
4.
Install clutch pedal assembly upper retaining bolts.
Torque: 23 Nm (Metric) 17.0 lb-ft (US English)
5.
Install the vacuum brake booster rod U-shaped clip and
the brake pedal connecting pin.
6.
Install the clutch master cylinder piston rod U-shaped clip
and the clutch pedal connecting pin.
7.
Connect brake switch harness connector.
8.
If necessary, adjust the clutch pedal free travel.
9.
Install the instrument panel.
10. Connect the battery negative cable.
FE03-0201b
3.2.6.2 Clutch Master Cylinder Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
Clutch System
EC718/EC718RV EC715/EC715RV 10/2009
3-17