Geely EC718 2009 Workshop Manual page 332

2-250 Fuel System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
5. Loosen filter retaining bolts on the bracket.
6. Disconnect the fuel inlet and outlet pipes.
Note
If sand enters into the pipe joints, removal may
become difficult. With a wood handle gently knock
the filter housing to remove the sand, and then push
the pipe toward the filter direction. Press the lock to
Disconnect the pipe.
FE02-0068b
Installation Procedure:
1. Install the fuel filter to the bracket and pay attention to the
direction of the filter.
2. Connect the fuel inlet and outlet pipes.
3. Tighten the filter retaining bolts.
4. Install fuel filter bracket bolts.
Torque: 9 Nm (Metric) 6.66 lb-ft (US English)
5. Connect the battery negative cable.
FE02-0069b
2.3.8.3 Fuel Pump Assembly Replacement
Removal Procedure:
Warning!
Refer to "Release Fuel Pressure Warning" in "Warnings
and Notices".
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
Engine