Geely EC718 2009 Workshop Manual page 432

2-350 Engine Mechanical System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
6. Install and tighten the right engine mount to the body bolts.
Torque: 52 Nm (Metric) 38.5 lb-ft (US English)
7. Remove the supporting jack.
8. Install the engine hood.
9. Install the battery negative cable.
2.6.8.8 Timing Chain Tensioner Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the engine hood. Refer to
Shield
3. Remove the ignition coil. Refer to
Replacement.
4. Remove the cylinder head cover. Refer to
Head Cover
5. Rotate the crankshaft and make sure the cylinder No.1 is
at TDC position.
FE02-0135b
Note
Crankshaft timing mark is aligned with the timing
chain cast scale line "0".
Disconnection.
Replacement.
Replacement.
Engine
2.6.8.1 Plastic Engine
2.10.8.3 Ignition Coil
2.6.8.2 Cylinder