Geely EC718 2009 Workshop Manual page 643

Engine
Yes
Step 6 Replace the starter motor.
Step 7 Does the starter rotate?
No
Does the starter motor electromagnetic switch work?
Step 8
Yes
Check whether the engine and drive belt system catching (engine catching, generator catching)?
Step 9
No
Step 10 Check whether the resistance between the battery and the starter solenoid switch is too high?
Yes
Check whether the resistance between the battery and the starter ground circuit is too high.
Step 11
Yes
Step 12 Check whether the starter solenoid switch wiring harness connections is normal.
Starting / Charging System JL4G18-D
(b) Check the battery terminal connections for existence of loose
and corrosion.
(c) Check the engine mechanical system for existence of
unusual noise. Check whether the cylinder compression
pressure is normal.
All normal?
Repair the faulty part.
No
Replace the starter motor.
Yes
Go to step 14
No
Repair the catching parts.
Yes
Standard Resistance:<0.3 Ω
Is the resistance specified value?
Check and repair the cable, if necessary,
No
replace the cable.
Standard Resistance:<1 Ω
Is the resistance specified value?
Check and repair the cable, if necessary,
No
replace the cable.
EC718/EC718RV EC715/EC715RV 10/2009
2-561