Geely EC718 2009 Workshop Manual page 987

Transmission / Drive Axle
3rd Gear Working Status:
The shift control makes the 3rd/4th shift shaft and fork move to
the left side (front end) of the transmission. The 3rd/4th gear
synchronizer and 3rd gear are meshing. Main shaft receives
the input torque from the 3rd gear and outputs torque and
speed opposite to the input shaft.
4th Gear Working Status:
FE03-2006b
The shift control makes the 5th/Reverse shift shaft and fork
move to the left side (rear end) of the transmission. The 3rd/
4th gear synchronizer and 4th gear are meshing. Main shaft
receives the input torque from the 4th gear and outputs torque
and speed opposite to the input shaft.
Manual Transmission
EC718/EC718RV EC715/EC715RV 10/2009
3-33
FE03-2007b