Geely EC718 2009 Workshop Manual page 417

Engine Engine Mechanical System JL4G18-D
3. Release the Drive Belt Tensioner device to the normal
position.
Note
Before releasing the tensioner device, confirm the
drive belt aligned drive pulley groove, otherwise the
drive belt may be damaged.
4. Connect the battery negative cable.
2.6.8.4 Drive Belt Tensioner Replacement
Removal Procedure:
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the hood. Refer to
Replacement.
3. Remove the drive belt. Refer to
Replacement.
4. Remove the drive belt tensioner retaining nut.
FE02-0087b
Disconnection.
2.6.8.1 Plastic Engine Shield
EC718/EC718RV EC715/EC715RV 10/2009
2-335
2.6.8.3 Drive Belt