Engine
Engine Anti-theft System JL4G18-D
2.5.8.2 Anti-theft System Control Module
Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2.
Remove instrument panel trim under the driver's side.
Refer to
3.
Remove the anti-theft system control module retaining
bolts.
FE02-0456b
4.
Disconnect anti-theft system control module wiring
harness connector.
FE02-0457b
Disconnection.
11.10.8.1 BCM
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
2-297