Geely EC718 2009 Workshop Manual page 979

Transmission / Drive Axle
Installation Procedure:
1. Connect the clutch slave cylinder to the transmission
housing and tighten the bolts.
Torque: 20 Nm (Metric) 14.8 lb-ft (US English)
FE03-0223b
2. Connect the clutch fluid tube to the clutch slave cylinder
and tighten the bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
3. Apply grease to the rod joints and be careful not to make
the dust cover dirty.
4. Hydraulic clutch bleeding. Refer to
Clutch
5. Adjust the clutch pedal. Refer to
Travel
6. Fill brake fluid to the fluid reservoir Maximum mark.
FE03-0224b
Clutch System
Bleeding.
3.2.6.4 Clutch Pedal Free
Adjustment.
EC718/EC718RV EC715/EC715RV 10/2009
3-25
3.2.6.3 Hydraulic