Geely EC718 2009 Workshop Manual page 303

Engine
2.2.8.8 Engine Control Module Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices"
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the glove box. Refer to
Replacement.
3. Disconnect the engine control module wiring harness
connector.
4. Remove the engine control module retaining bolts.
FE02-0065b
Installation Procedure:
1. Install the engine control module retaining bolts.
Torque: 9 Nm (Metric) 6.66 lb-ft (US English)
2. Connect the engine control module wiring harness
connector.
3. Install the glove box.
4. Connect the battery negative cable.
FE02-0065b
Control System JL4G18-D
Disconnection.
EC718/EC718RV EC715/EC715RV 10/2009
2-221
12.8.3.2 Glove Box