Geely EC718 2009 Workshop Manual page 620

2-538 Ignition System JL4G18-D
EC718/EC718RV EC715/EC715RV 10/2009
3. Disconnect the crankshaft position sensor wiring harness
connector.
FE02-0385b
4. Remove the sensor retaining bolts.
Note
After removing the sensor, plug the sensor mounting
hole to prevent debris falling into it.
FE02-0386b
Installation Procedure:
1. Install the sensor and tighten the retaining bolts.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
2. Connect the crankshaft position sensor wiring harness
connector.
3. Install the air filter assembly.
Torque: 9 Nm (Metric) 6.7 lb-ft (US English)
4. Connect the battery negative cable.
FE02-0387b
Engine