Geely EC718 2009 Workshop Manual page 1001

Transmission / Drive Axle
Diagnostic Steps:
Check transmission shift control system.
Step 1
No
Check the shift control assembly.
Step 2
Next
Step 3 System normal.
3.3.7.6 Abnormal Sound When Running
Diagnostic Steps:
Step 1 Check abnormal sound.
2. Transmission Shift Control Cable
3. Shift Control Assembly
4. Shift Fork and The Lock Mechanism
5. Synchronizer
(a) Disconnect transmission shift control cable and transmission
control connections.
(b) Check the shift lever for catching. The normal gear selection
force is<8N (1.8LB), engaging a gear force is<4N (0.9LB).
(c) Check the transmission shift control for damaged ables and
catching.
Yes
(a) Engage and disengage gears.
(b) Check the shift control assembly for catching.
(c) Repair or replace damaged shift fork, or synchronizer.
(d) Confirm repair completed.
(a) Stop the vehicle, shut down the engine, place transmission
in neutral gear.
(b) Check whether the abnormal sound stops.
Manual Transmission
3.3.8.9 Shift Lever
3.3.8.4 Shift
Replacement,3.3.8.5
Assembly Disassemble and
3.3.8.3 Transmission
Replacement,3.3.8.6
Replacement,3.3.8.7
Disassemble and Assemble,3.3.8.8 Main
shaft Disassemble and
3.3.8.3 Transmission
Replacement,3.3.8.6
Replacement,3.3.8.7
Disassemble and Assemble,3.3.8.8 Main
shaft Disassemble and
Repair or replace the shift lever or shift control
cable.
EC718/EC718RV EC715/EC715RV 10/2009
3-47
Replacement.
Control Assembly
Shift Control
Assemble.
Assembly
Shift Shaft
Input Shaft
Assemble.
Assembly
Shift Shaft
Input Shaft
Assemble.