Engine
3.
Install the high-voltage damping line and the spark plug.
4.
Install the engine hood.
5.
Connect the battery negative cable.
FE02-0403b
2.10.8.5 Knock Sensor Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices".
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2.
Remove
Replacement.
3.
Disconnect the knock sensor harness connector.
4.
Remove the retaining bolts and the knock sensor.
FE02-0404b
Ignition System JL4G18-D
Disconnection.
the
starter.
Refer
EC718/EC718RV EC715/EC715RV 10/2009
2-545
to
2.11.8.4 Starter