Geely EC718 2009 Workshop Manual page 16

1-10 Warnings and Notices Vehicle Overview
Test Probe Notice
Notice: Do not insert test equipment probes (DMM etc.) into
any connector or fuse block terminal. The diameter of the test
probes will deform most terminals. A deformed terminal will
cause a poor connection, which will result in a system failure.
Always use approved terminal test kit in order to front probe
terminals. Do not use paper clips or other substitutes to probe
terminals.
Notice: When using the approved terminal test kit, ensure the
terminal test adapter choice is the correct size for the connector
terminal. Do not visually choose the terminal test adapter
because some connector terminal cavities may appear larger
than the actual terminal in the cavity. Using a larger terminal
test adapter will damage the terminal.
Using Proper Power Steering Fluid Notice
Notice: When adding fluid or making a complete fluid change,
always use DEXRONⅢ Failure to use the proper fluid will
cause hose and seal damage and fluid leaks.
Window Edge Damage Notice
Notice: Avoid damage to the window from impacting objects
due to an exposed edge. The window must be 1 mm (0.025 in)
below the surface of the sheet metal to avoid window damage.
EC718/EC718RV EC715/EC715RV 10/2009